1. 首页
  2. 自学中心
  3. 软件
  4. Excel

破解EXCEL工作表保护密码及宏保护密码,读取隐藏工作表内的数据

该宏能破解EXCEL的工作表保护密码

现举例破解EXCEL 的保护密码以及宏密码
现有一 test.xls文件 其有工作表保护密码、宏编辑密码 数据表sheet2隐藏不可见
现在按步骤破解该EXCEL文档
1、首先需要去掉宏密码
使用16进制编辑器(如UltraEdit)打开test.xls
找到ID,CMG、DPB、GC串 把ID=”” (包括命令=”字串”) 全部覆盖为&H0d &H0a(&H是十六进制)如果遇到单字节用&H20覆盖
注意要小心 并做好备份 否则文档将损坏
2、破解excel工作表保护密码

完成第一步后 打开test.xls文档
再点工具—宏—Visual Basic编辑器(这事可以看到该文件有2个sheet sheet1可见 sheet2隐藏)
新建一个模块
把专用破解excel保护密码的宏 复制到模块里
点击运行 连续确定2次 test.xls的工作表保护密码就没有了
新建一个工作表sheet3
这时把破解保护密码的宏删掉
利用VBA 把sheet2的数据复制过来就行了
可以使用二重的do循环 一个读行 一个读列
例如
sheet3.cells(i,j)=sheet2.cells(i,j)
这种
就行了
呵呵
至此 破解及读取数据完成
宏如下
Option Explicit
Public Sub AllInternalPasswords()
‘ Breaks worksheet and workbook structure passwords. Bob McCormick
‘ probably originator of base code algorithm modified for coverage
‘ of workbook structure / windows passwords and for multiple passwords

‘ Norman Harker and JE McGimpsey 27-Dec-2002 (Version 1.1)
‘ Modified 2003-Apr-04 by JEM: All msgs to constants, and
‘ eliminate one Exit Sub (Version 1.1.1)
‘ Reveals hashed passwords NOT original passwords

Const DBLSPACE As String = vbNewLine & vbNewLine
Const AUTHORS As String = DBLSPACE & vbNewLine & _
“Adapted from Bob McCormick base code by” & _
“Norman Harker and JE McGimpsey”
Const HEADER As String = “AllInternalPasswords User Message”
Const VERSION As String = DBLSPACE & “Version 1.1.1 2003-Apr-04”
Const REPBACK As String = DBLSPACE & “Please report failure ” & _
“to the microsoft.public.excel.programming newsgroup.”
Const ALLCLEAR As String = DBLSPACE & “The workbook should ” & _
“now be free of all password protection, so make sure you:” & _
DBLSPACE & “SAVE IT NOW!” & DBLSPACE & “and also” & _
DBLSPACE & “BACKUP!, BACKUP!!, BACKUP!!!” & _
DBLSPACE & “Also, remember that the password was ” & _
“put there for a reason. Don’t stuff up crucial formulas ” & _
“or data.” & DBLSPACE & “Access and use of some data ” & _
“may be an offense. If in doubt, don’t.”
Const MSGNOPWORDS1 As String = “There were no passwords on ” & _
“sheets, or workbook structure or windows.” & AUTHORS & VERSION
Const MSGNOPWORDS2 As String = “There was no protection to ” & _
“workbook structure or windows.” & DBLSPACE & _
“Proceeding to unprotect sheets.” & AUTHORS & VERSION
Const MSGTAKETIME As String = “After pressing OK button this ” & _
“will take some time.” & DBLSPACE & “Amount of time ” & _
“depends on how many different passwords, the ” & _
“passwords, and your computer’s specification.” & DBLSPACE & _
“Just be patient! Make me a coffee!” & AUTHORS & VERSION
Const MSGPWORDFOUND1 As String = “You had a Worksheet ” & _
“Structure or Windows Password set.” & DBLSPACE & _
“The password found was: ” & DBLSPACE & “$$” & DBLSPACE & _
“Note it down for potential future use in other workbooks by ” & _
“the same person who set this password.” & DBLSPACE & _
“Now to check and clear other passwords.” & AUTHORS & VERSION
Const MSGPWORDFOUND2 As String = “You had a Worksheet ” & _
“password set.” & DBLSPACE & “The password found was: ” & _
DBLSPACE & “$$” & DBLSPACE & “Note it down for potential ” & _
“future use in other workbooks by same person who ” & _
“set this password.” & DBLSPACE & “Now to check and clear ” & _
“other passwords.” & AUTHORS & VERSION
Const MSGONLYONE As String = “Only structure / windows ” & _
“protected with the password that was just found.” & _
ALLCLEAR & AUTHORS & VERSION & REPBACK
Dim w1 As Worksheet, w2 As Worksheet
Dim i As Integer, j As Integer, k As Integer, l As Integer
Dim m As Integer, n As Integer, i1 As Integer, i2 As Integer
Dim i3 As Integer, i4 As Integer, i5 As Integer, i6 As Integer
Dim PWord1 As String
Dim ShTag As Boolean, WinTag As Boolean
Application.ScreenUpdating = False
With ActiveWorkbook
WinTag = .ProtectStructure Or .ProtectWindows
End With
ShTag = False
For Each w1 In Worksheets
ShTag = ShTag Or w1.ProtectContents
Next w1
If Not ShTag And Not WinTag Then
MsgBox MSGNOPWORDS1, vbInformation, HEADER
Exit Sub
End If
MsgBox MSGTAKETIME, vbInformation, HEADER
If Not WinTag Then
MsgBox MSGNOPWORDS2, vbInformation, HEADER
Else
On Error Resume Next
Do ‘dummy do loop
For i = 65 To 66: For j = 65 To 66: For k = 65 To 66
For l = 65 To 66: For m = 65 To 66: For i1 = 65 To 66
For i2 = 65 To 66: For i3 = 65 To 66: For i4 = 65 To 66
For i5 = 65 To 66: For i6 = 65 To 66: For n = 32 To 126
With ActiveWorkbook
.Unprotect Chr(i) & Chr(j) & Chr(k) & _
Chr(l) & Chr(m) & Chr(i1) & Chr(i2) & _
Chr(i3) & Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)
If .ProtectStructure = False And _
.ProtectWindows = False Then
PWord1 = Chr(i) & Chr(j) & Chr(k) & Chr(l) & _
Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _
Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)
MsgBox Application.Substitute(MSGPWORDFOUND1, _
“$$”, PWord1), vbInformation, HEADER
Exit Do ‘Bypass all for…nexts
End If
End With
Next: Next: Next: Next: Next: Next
Next: Next: Next: Next: Next: Next
Loop Until True
On Error GoTo 0
End If
If WinTag And Not ShTag Then
MsgBox MSGONLYONE, vbInformation, HEADER
Exit Sub
End If
On Error Resume Next
For Each w1 In Worksheets
‘Attempt clearance with PWord1
w1.Unprotect PWord1
Next w1
On Error GoTo 0
ShTag = False
For Each w1 In Worksheets
‘Checks for all clear ShTag triggered to 1 if not.
ShTag = ShTag Or w1.ProtectContents
Next w1
If ShTag Then
For Each w1 In Worksheets
With w1
If .ProtectContents Then
On Error Resume Next
Do ‘Dummy do loop
For i = 65 To 66: For j = 65 To 66: For k = 65 To 66
For l = 65 To 66: For m = 65 To 66: For i1 = 65 To 66
For i2 = 65 To 66: For i3 = 65 To 66: For i4 = 65 To 66
For i5 = 65 To 66: For i6 = 65 To 66: For n = 32 To 126
.Unprotect Chr(i) & Chr(j) & Chr(k) & _
Chr(l) & Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _
Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)
If Not .ProtectContents Then
PWord1 = Chr(i) & Chr(j) & Chr(k) & Chr(l) & _
Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _
Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)
MsgBox Application.Substitute(MSGPWORDFOUND2, _
“$$”, PWord1), vbInformation, HEADER
‘leverage finding Pword by trying on other sheets
For Each w2 In Worksheets
w2.Unprotect PWord1
Next w2
Exit Do ‘Bypass all for…nexts
End If
Next: Next: Next: Next: Next: Next
Next: Next: Next: Next: Next: Next
Loop Until True
On Error GoTo 0
End If
End With
Next w1
End If
MsgBox ALLCLEAR & AUTHORS & VERSION & REPBACK, vbInformation, HEADER
End Sub

原创文章,作者:xsmile,如若转载,请注明出处:http://www.17bigdata.com/%e7%a0%b4%e8%a7%a3excel%e5%b7%a5%e4%bd%9c%e8%a1%a8%e4%bf%9d%e6%8a%a4%e5%af%86%e7%a0%81%e5%8f%8a%e5%ae%8f%e4%bf%9d%e6%8a%a4%e5%af%86%e7%a0%81%ef%bc%8c%e8%af%bb%e5%8f%96%e9%9a%90%e8%97%8f%e5%b7%a5/

联系我们

在线咨询:点击这里给我发消息

邮件:23683716@qq.com

跳至工具栏